MCH-100-STN NOZZLE

MCH-100-STN NOZZLE
NSN# 1680-01-648-6231

The MCH-100-STN is a Sieve Tube Nozzle is specifically engineered to install 150C and 200C Solder Sleeve Devices, Large Gauge Cable Repair Wraps, and Matched Impedance Coax Splices. The design is Teflon coated and features a pressure latched, hinged sieve enclosure to produce a heating envelope that evenly distributes thermal energy to the installation site. The Sieve Tube Nozzle utilizes Malcom’s standard Twist-n-Lock design that allows the nozzle to be easily installed and removed from the 111.038.1 Battery Powered Heat Gun standard to the MCH-100-A and MCH-100-C Heat Gun Kits. The MCH-100-STN nozzle can also be used on the standard Leister Hot Jet S Hot Air Tool 120V UL hot air tool.

Dimensions and Specifications

  • 2.37” W x 1.14” OD x 0.75” ID

  • Nozzle Material: Stainless Steel 1.4301 (X5CrNi18-10), Teflon Coating

  • Connector Twist-N-Lock Bayonet

Temperature ** 490°F to 754°F w/ 111.038.1 and 300 W element
Heat Envelope*** 694°F at Center, 637°F at opening, 566°F at 1” from opening

Performance:

  • Installs 150°C Solder Sleeves on 4 AWG (0.175” x 0.26”) cable with 111.038.1 set at 630°F.

  • Installs 150°C Solder Sleeves on 10 AWG (0.125”) cable with 111.038.1D set at 450°F.

  • Installs LGWR C Wrap on 2/0 AWG (0.45”) Cable with 325 W 111.038.1 Heat Gun in < 7 min after ramp-up.

 ** Actual value is dependent on MCH-102NW 48VDC Power Supply State of Charge.

*** 48VDC, 8.5A

LINKS & FILE DOWNLOADS
Information Sheet


APPLICATIONS
Heat Shrink Tubing, Soldering

INDUSTRIES
Aerospace, Aviation, Electronics

CUSTOMERS
U.S. DOD

PARTNER(S)
Leister

headshot_jonathan.jpg

Contact us to discuss application challenges and technical requirements. Call 1-800-289-7505 or complete our online form.